SOLAC Espression Supremma CA4815 Mode D'emploi page 54

19 MESSAGES
Function Icon on display
Fill the system
with water.
The steam nozzle
has not been
closed correctly.
No water.
Grounds
compartment full.
Main cover open.
No grounds
compartment.
No brewing unit.
No drip tray.
Comment
The coffee-maker needs to fill its internal circuits with water. Before
transporting the coffee-maker, the circuits are emptied to prevent
the forming of bacteria and must then be refilled. To fill the system,
use the steam regulator.
CLOSE THE STEAM NOZZLE before making the coffee. This will
prevent the steam nozzle from dripping when you are making a
coffee. Once closed, the symbol disappears.
FILL THE WATER TANK. The coffee-maker will not make any more
cups of coffee until the water tank has been filled.
CLEAN THE COMPARTMENT. The coffee-maker will not make any
more cups of coffee until the coffee grounds have been emptied.
CLOSE THE SIDE COVER. The coffee-maker will not make more cups
of coffee until the cover is closed.
PUT THE COMPARTMENT IN POSITION. The coffee-maker will not
make any more cups of coffee until the grounds compartment has
been put in position.
FIT THE BREWING UNIT. The coffee-maker will not make any more
cups of coffee until the brewing unit has been fitted.
PUT THE DRIP TRAY IN POSITION. The coffee-maker will not make
more cups of coffee until the drip tray has been put in position.
25