Labeling A Cd; Disc Memo - Sony CDX-C8050X Mode D'emploi

Labeling a CD

(For a CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 16) and select the specific
tracks for playback (page 17).
1
Press (MENU), then press either side of
(DISC/PRST) repeatedly until "Name
Edit" appears.
2
Press (ENTER).
Name edit mode
3
Enter the characters.
1 Press (+) side of (DISC/PRST)
repeatedly to select the desired
characters.
(A t B t C t ··· Z t 0 t 1 t 2 t
··· 9 t + t – t * t / t \ t > t <
t . t )
If you press (–) side of (DISC/PRST)
repeatedly, the characters will appear in
reverse order.
If you want to put a blank space between
characters, select " " (under-bar).
2 Press (+) side of (SEEK/AMS) after
locating the desired character.
The next character flashes.
If you press (–) side of (SEEK/AMS), the
previous character flashes.
3 Repeat steps 1 and 2 to enter the
entire name.
4
To return to normal CD playback mode,
press (ENTER).

— Disc Memo

Tips
• To erase or correct a name, enter " " (under-
bar) for each character.
• There is another way to start labeling a CD. Press
and hold (LIST) for two seconds instead of steps
1 and 2. You can also complete the operation by
pressing and holding (LIST) for two seconds
instead of step 4.
Displaying the disc memo
Press (DSPL) during CD or CD TEXT disc
playback.
Each time you press (DSPL) during CD or
CD TEXT disc playback, the item changes
as follows:
Disc number*
Elapsed playback time
Disc memo name
Track name*
1 While an optional CD unit is connected.
*
2 If you connect an optional CD unit with the
*
CD TEXT function, the CD TEXT information
will appear in the display when you play a
CD TEXT disc.
Note
Do not use the Custom file feature while driving,
or perform any other function which could divert
your attention from the road.
V
1 /Track number/
V
V
2
15