Aqua Medic Mistral 2000 Mode D'emploi page 4

Aquarium membrane air pump with a maximum capacity of 2,500 l/h (approx. 660 gph, Mistral
2000) or 4,000 l/h (approx. 1,056 gph, Mistral 4000).
In purchasing this unit, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts. This unit will efficiently meet the air supply requirements of most types of
aquarium.
1. Features
The Mistral membrane air pumps are designed for universal use. The housing is made from cast aluminium and
this, combined with the magnetic control system and the vibration reducing rubber feet, results in exceptionally
quiet operation.
2. Technical Data
Type:
Power requirements:
Power uptake:
Maximum capacity:
Capacity at 1 m (3 ft) depth (100 mbar,
1.45 psi):
Maximum pressure:
Connection pressure side:
Cable length:
Weight:
Housing:
2500
2250
2000
1750
1500
1250
1000
750
500
250
0
0 0,05 0,1
Fig. 1: Capacity of the Mistral 2000
Fig. 2: Capacity of Mistral 4000
3. Connections
The pump is connected to the equipment it supplies with an aquarium air hose (12 mm, ½"). If ozone is to be
used, ozone resistant tubing (e. g. silicone) must be used after the ozonizer. When operating several consumers
the distributor provided can be used. 10 consumers can be attached via a 6/4 aquarium air hose.
4
Operation Manual ENG
Mistral 2000
220 - 240 volts ~ 50 Hz
25 watts
2,500 litres/hour (approx. 660
gph)
1,600 litres/hour (approx. 422
gph)
>300 mbar, 4.35 psi
air tube 12 mm
3 m
3.5 kg (7.8 lbs)
cast aluminium
0,15 0,2 0,25 0,3
Druck (bar)
0,35
Mistral 4000
220 - 240 volts ~ 50 Hz
35 watts
4,000 litres/hour (approx. 1,056
gph)
2,900 litres/hour (approx. 765
gph)
>300 mbar, 4.35 psi
air tube 12 mm
3 m
5.6 kg (approx. 12.4 lbs)
cast aluminium