Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing the hood
38
Recommendations for wall mounting
Do not make any changes to the unit or its mounting
bracket on the wall!
Before installing the device, check the condition of the
wall on which it will be fixed: the wall must be in good
condition, it must not show any damage (cracks, sagging,
humidity, ...).
Do not drill a hole near old holes, even plugged
It is imperative that you consult a building professional
to use the anchoring system (screws, dowels, etc.)
appropriate to the material that constitutes your wall,
as well as to the weight of the appliance. Observe the
diameter of the fixing screws indicated in this manual.
Do not modify the holes for securing the unit or its
mounting bracket to the wall.
Drill the wall with a drill of the appropriate size for the
anchoring system. Remove debris and dust.
Regularly check the mounting points of the device on
the wall. Tighten them if necessary.
Publicité
Chapitres
Table des Matières
