Defining Prioritisation Of Programs - Intermatic Grasslin talento smart C25 Manuel D'utilisation

DEFINING PRIORITISATION OF PROGRAMS

You specify the order in which the programs of the device should be run using prioritisation. You can thus
EN
execute a daily switching command, but can define via a higher priority, that, for example, other swit-
ching times of the device are valid during holidays.
The choice of priority is only possible in advanced mode.
By default, the priority is specified as follows:
• Without date  very low
• With date reference  medium
• With individual date  high
The following priorities can be set:
• Very Low
• Low
• Medium
• High
• Very High
Example:
A daily program switches on the device every day from morning 08:00 to 17:00 in the afternoon. If, for
example, you do not want the device to switch on on weekends of a holiday, create a program with a
higher priority for these days. This program takes precedence over the other settings.
61