Intermatic Grasslin talento smart C25 Manuel D'utilisation page 55

Masquer les pouces Voir aussi pour Grasslin talento smart C25:

Table des Matières

Les langues disponibles

Programming command

1. Press the

and confirm with

For clarification of the following action steps, see flow chart.

and confirm with

,specify whether the device is to be activated on a certain date and - if yes -

confirm with

(also refer to Seite 52).

and confirm with

6. Enter hour and minute of the switch-off time (+/-) and confirm each with

NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant.

The choice of these parameters is between 11 p.m. and midnight.

7. Set the weekday(s) (+/-) to which the switching time should apply, and confirm with

NOTE: The weekdays 1-5, 6-7 and 1-7 are preset. Individual weekdays can be set (+/-) under

"Select days".

(+/-) for which the switching time should be set, and confirm with

8. Select channel

NOTE: The plus sign stands for an active, the minus sign for an inactive channel.

to create an additional switching time, or select

the possible priority

The channel selection is only available with 2-channel timers

The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs"

auf Seite 61.

to determine

Weitere Schaltzeit?

Chapitres

Table des Matières