Front Panel - Yamaha M-5000 Mode D'emploi

A. STANDBY/ON/OFF (Power)
switch/indicator
Turns the power to the unit on or off.
STANDBY/ON: Turns the power to the unit on.
OFF: Turns the power to the unit off.
Power status
On mode
Standby mode
Off mode
The unit will enter standby mode in one of the following
events:
• If the unit is powered on but not operated for eight
hours while the auto power standby function is turned
on, or
• If you turn off the power to the device that is connected
to this unit's TRIGGER IN jack.
For more information, refer to " G AUTO POWER
STANDBY switch" in the "Rear panel" section
(page 9) and to "Trigger connections" (page 13).
6

Front panel

NATURAL SOUND
SPEAKERS
OFF
Indicator
Lit brightly
Lit dimly
Off
P O W E R AMPLIFIER
A
B
+
A B
BI WIRING
Note
After you turn on the unit, it will take a few seconds before
the unit can reproduce sound .
NOTICE
If you plan not to use the unit for an extended period of
time, be sure to unplug the power cord from the AC outlet .
Even when the STANDBY/ON/OFF (Power) switch is turned
off (the power indicator is dark), a minimal amount of
electric current is still flowing to the unit .
B.
SPEAKERS selector
Turns on or off two sets of speakers connected to the
SPEAKERS A and B terminals on the rear panel.
OFF: Both sets of speakers are off.
A: The set of speakers connected to the A terminal is on.
B: The set of speakers connected to the B terminal is on.
A+B/BI-WIRING: Both sets of speakers are on.