Intimidator™ Spot 355Z IRC QRG
Menu Map
Main Level
Address
Run Mode
Setup
Sys Info
DMX Linking
Starting Address
Master/Slave
Connection
All manuals and user guides at all-guides.com
Programming Levels
001–512
09CH
DMX
15CH
Auto
Sound
Slave
IR
OFF
Pan Reverse
ON
OFF
Tilt Reverse
ON
OFF
Screen Reverse
ON
540
Pan Angle
360
180
270
Tilt Angle
180
090
Sensitivity
001–100
Reset
Factory Set
Ver: VX.X
Running Mode: XXXXX
Dmx Address: XXX
Temperature: XXX
The Intimidator™ Spot 355Z IRC works with a DMX controller. Information
about configuring the Intimidator™ Spot 355Z IRC for DMX operation is in the
User
Manual,
which
http://www.chauvetlighting.com/product-manuals-literature/. Information about DMX
is in the CHAUVET® DMX Primer, which is available from the CHAUVET®
website: http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address for this product is 498.
The Intimidator™ Spot 355Z IRC works in Master/Slave mode. Information
about configuring this product for Master/Slave operation is in its User
Manual,
which
is
http://www.chauvetlighting.com/product-manuals-literature/.
Sets the DMX starting address
Selects DMX mode
Selects auto program
Selects Sound-Active mode
Selects Slave mode
Selects infrared control
Normal pan operation
Reverse pan operation
Normal tilt operation
Reverse tilt operation
Normal display
Reverse display
Selects the 540° pan angle range
Selects the 360° pan angle range
Selects the 180° pan angle range
Selects the 270° tilt angle range
Selects the 180° tilt angle range
Selects the 90° tilt angle range
Sets sound sensitivity
Resets the product
Loads factory defaults
Displays the software version
Displays the current running mode
Displays the current DMX address
Displays the LED temperature in Celsius
is
available
from
the
available
from
the
6
EN
Description
CHAUVET®
website:
CHAUVET®
website: