Direct Disc Search; Track /Disc Repeat; Random Play - Kenwood KDC-PS907 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Each time the button is pressed, the displayed disc number
decreases by one.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
+
Press the DISC
button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.
NOTE
"LOAD" is displayed when discs are being exchanged on the disc
changer.

Direct Disc Search

Using the remote, directly input the disc number that you
want to listen to.
1
Using the number buttons on the remote, input the number of
the disc that you want to listen to.
The selected disc number will blink in the display for 10
seconds.
If you make no further input in the 10-second period, the
number entry mode will automatically be canceled.
NOTE
• Input "0" to select disc 10.
• If you input more than two numbers all at once, a search will be
made only of the last number input.
+
2
Press either the DISC
or DISC
inputted is blinking.
The disc starts playing.
Canceling Direct Disc Search While It Is Operating:
Press the 38 button.
Track / Disc Repeat
Repeat playing the track or the disc currently being listened
to.
Function of Remote (See page 11)
button while the number
Turning Repeat Play On/Off:
Press the REP button to switch repeat track/disc play on and
off as follows:
Track Repeat ON
Disc Repeat ON
Track/Disc Repeat OFF
The REP indicator lights up when repeat play is turned on.
The track number blinks in the display when track repeat is on.
The disc number blinks in the display when disc repeat is on.
NOTE
Repeat play is canceled when you stop playing the disc.

Random Play

Play all the tracks on the current disc in random order.
1
Press the RDM button to switch random play on and off.
The RDM indicator lights up when random play is turned on.
The track number will change over and over in the display as
the next track is being selected.
When the track has been selected, play will begin.
The selected track number blinks in the display as it is being
played.
NOTE
When all the tracks on a certain disc have been played using
random play, the next disc on the changer will start playing using
the same function.
2
To change the track being heard, press the ¢ button.
Another track will be selected and played.
NOTE
Random play is canceled when you stop playing a disc.
25

Publicité

Table des Matières
loading

Table des Matières