Air Index - Honda GX240 Manuel De L'utilisateur

Air Index

An Air Index Information hang tag/label is applied to engines
certified to an emission durability time period in accordance with
the requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability
to compare the emissions performance of available engines. The
lower the Air Index, the less pollution.
The durability description is intended to provide you with
information relating to the engine's emission durability period.
The descriptive term indicates the useful life period for the engine's
emission control system. See your Emission Control System
Warranty for additional information.
Descriptive Term Applicable to Emissions Durability
Period
Moderate
125 hours [greater than 65 cm (65 cc)]
125 hours [0 65 cm (0 65 cc)]
Intermediate
250 hours [greater than 65 cm (65 cc)]
Extended 300 hours [0 65 cm (0 65 cc)]
500 hours [greater than 65 cm (65 cc)]
The Air Index Information hang tag/label must remain on the
engine until it is sold. Remove the hang tag before operating the
engine.
18
50 hours [0 65 cm (0 65 cc)] − −
− −
− −
Specifications
GX240/GX270 (PTO shaft type S)
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
GX240
[Bore Stroke]
×
GX270
Net power
GX240
(in accordance
GX270
＊
with SAE J1349 )
Max. Net torque
GX240
(in accordance
＊
with SAE J1349 )
GX270
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
GX340/GX390 (PTO shaft type S)
Length × Width ×
Height
Dry mass [weight]
Engine type
Displacement
GX340
[Bore × Stroke]
GX390
Net power
GX340
(in accordance
GX390
＊
with SAE J1349 )
Max. Net torque
GX340
(in accordance
＊
with SAE J1349 )
GX390
Engine oil capacity
Fuel tank capacity
Cooling system
Ignition system
PTO shaft rotation
＊ The power rating of the engine indicated in this document is the
net power output tested on a production engine for the engine
model and measured in accordance with SAE J1349 at 3,600
rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass
production engines may vary from this value.
Actual power output for the engine installed in the final machine
will vary depending on numerous factors, including the
operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
ENGLISH
355 × 430 × 410 mm
(14.0 × 16.9 × 16.1 in)
25.0 kg (55.1 lbs)
4-stroke, overhead valve, single cylinder
242 cm (14.8 cu-in)
[73.0 × 58.0 mm (2.9 ×
270 cm (16.5 cu-in)
[77.0 × 58.0 mm (3.0 ×
5.3 kW (7.2 PS, 7.1 bhp) at 3,600 rpm
6.0 kW (8.2 PS, 8.0 bhp) at 3,600 rpm
15.3 N·m (1.56 kgf·m, 11.3 lbf·ft)
at 2,500 rpm
17.7 N·m (1.80 kgf·m, 13.1 lbf·ft)
at 2,500 rpm
1.1 (1.2 US qt , 1.0 Imp qt)
5.3 (1.40 US gal , 1.17 Imp gal)
Forced air
Transistor magneto
Counterclockwise
380 × 450 × 443 mm
(15.0 × 17.7 × 17.4 in)
31.5 kg (69.4 lbs)
4-stroke, overhead valve, single cylinder
337 cm (20.6 cu-in)
[82.0 × 64.0 mm (3.2 ×
389 cm (23.7 cu-in)
[88.0 × 64.0 mm (3.5 ×
7.1 kW (9.7 PS, 9.5 bhp) at 3,600 rpm
8.2 kW (11.1 PS, 11.0 bhp) at 3,600 rpm
22.1 N·m (2.25 kgf·m, 16.3 lbf·ft)
at 2,500 rpm
25.1 N·m (2.56 kgf·m, 18.5 lbf·ft)
at 2,500 rpm
1.1 (1.2 US qt , 1.0 Imp qt)
6.1 (1.61 US gal , 1.34 Imp gal)
Forced air
Transistor magneto
Counterclockwise
2.3 in)]
2.3 in)]
2.5 in)]
2.5 in)]