Chauvet DJ INTIMIDATOR WAVE 360 IRC Guide De Référence Rapide page 4

Intimidator™ Wave 360 IRC QRG
AC Power
Power Linking
Fuse Replacement
Mounting
Mounting Diagram
All manuals and user guides at all-guides.com
Intimidator™ Wave 360 IRC has an auto-ranging power supply that can work
with an input voltage range of 100–240 VAC, 50/60 Hz.
Power linking is when products are daisy chained together through their Power In
and Power Out sockets, so that many products can be powered from one outlet.
For the maximum number of Intimidator™ Wave 360 IRC productss that can be
power linked at 120 V or at 240 V, see the User Manual or the label on the
product.
The User Manual
http://www.chauvetlighting.com/product-manuals-literature/.
1. Disconnect the product from power.
2. With a flat-head screwdriver, unscrew the fuse holder cap from
the housing.
3. Remove the blown fuse.
4. Replace with a fuse of the same type and rating.
5. Screw the fuse holder cap back in place and reconnect power.
Disconnect the product from power before replacing the fuse.
Before mounting this product, read the
points and one safety cable per product. Make sure the mounting clamps are
capable of supporting the weight of the product. For the Chauvet line of mounting
clamps, go to the Chauvet website at
main.html.
Hanging/Mounting
Bracket
Safety
Cable
When using only one mounting clamp, be sure to use a clamp with a captive
bolt to prevent accidental loosening.
is available at
Safety Notes. Use one or two mounting
www.chauvetlighting.com/cables-clamps-
4
EN
the Chauvet website
Mounting Clamp
Rubber
Feet (x4)
for Floor
Mounting