4.4.4 SAFETY RAIL
Lay the safety rail on proper fixing guides on car roof,
joining uprights and square pipes
Secure the safety rail to the roof by using 8 hex.-head
screws M10 with toothed washer 10, flat washer 10
and proper threaded plates.
Secure square pipes to the uprights inserting Hex.-
head screws M4 into the proper threaded holes
4.4.5 FINAL ACCESSORIES
4.4.5.1 C
AR DOOR PANELS
Insert the door panels shoes into the sill car line
Secure the shoe brackets to the door panels by using
4 allen-head screws socket M10 with split washer 10,
eccentric washer c/w three holes.
Secure the door panels to the operator trolleys by
using 4 ch.-headed screw with hex. socket M10, with
split washer 10, eccentric washer c/w three holes.
WARNING
The distance between the sill and the door
panels should be 5mm
4.4.5.2 M
AINTENANCE PUSH
Secure the maintenance push-button panel to car roof
by using the double side adhesive tape provided under
the box.
WARNING
The M
AINTENANCE
is supplied with the electrical part
Installation Manual
Car and door operator
-
BUTTON PANEL
P
-B
P
USH
UTTON
ANEL
P
F
ROTECTION
ILM
Remove the protection film from all parts at sight.
Pag. 8 di 8
4
Doc. n° 10991012
Par. n° 10991112
Rev.1.0.6
- 21.12.2005
EN
8