Kemper FilterCell XL Notice D'utilisation page 74

7.2.2 Draining the condensate from the compressed air vessel
Depending on usage, but at least once a month, the condensate must be
drained from the compressed air vessel.
The condensate drain valve is located on the rear of the product.
Pos. Description
1 Condensate drain valve with
knurled screw
Drain the condensate as follows:
1. As shown in the illustration, hold a suitable container (Pos. 2) under the
outlet opening of the condensate drain valve (Pos. 1).
2. Slowly open the knurled screw of the condensate drain valve (Pos. 1).
3. Only close the valve (Pos. 1) again when just air is escaping.
7.2.3 Changing the filter – Safety instructions
The life of the filter inserts depends on the type and amount of deposited
particles.
As the dust accumulation in the filter increases, its flow resistance
increases and the extraction capacity of the product decreases.
1502029-00
Fig. 21: Draining the condensate
Pos. Description
2
Tab. 24: Draining the condensate
- 73 -
Condensate drain valve
EN