Kemper FilterCell XL Notice D'utilisation page 66

3. Align the product as shown in the illustration using a suitable hexagonal
spanner. Use a spirit level for alignment and ensure that the machine
feet are evenly loaded.
Pos. Description
1 Connecting piece DN 160
2 Flange seal
4. As shown in the illustration, screw the duct connection (Pos. 1) with the
flange seal and the flange ring to the product.
1502029-00
Fig. 16: Mounting the connecting piece
Pos. Description
3
Tab. 19: Assembly of add-on products
- 65 -
Flange ring
EN