Publicité
RECORD
PLAY
Temporarily Suspending Play
This can be done in two ways
e Depress the CUT switch
Several
seconds
after
this
switch
is set,
the
tonearm
automatically
returns to the
arm
rest
and
the
platter
stops rotating.
Record play precautions
eWhen the tonearm does not return automatically
If a record with a non-standard
size is being played, the
tonearm
may
not return even
after play or it may-return
before the completion of play. In cases like this, depress
the CUT
switch
and the record
play is concluded
auto-
matically.
e Clean the stylus and records before and after
play (refer to page 9 )
Dust or dirt on the stylus or records will result in dis-
torted and discontinuous sound.
Remove
the dust on the stylus with a soft brush. Use a
good-quality
record cleaner obtainable
from your dealer
to remove dust and dirt on your records.
e Set the ARM
ELEVATION
lever to the
UP position
The
stylus
rises
from
the
surface
of
the
record
and
play
stops
(but the
platter
continues rotating).
When the tonearm is returned
manually
to
the
arm
rest,
the platter stops rotating.
NOTE:
After the tonearm
has
been returned manually
to
the
arm — rest,
always remember to set
the ARM
ELEVATION
lever
to
the
DOWN
position.
e Place only one record on the platter at a time
If two or more
records are placed, the angle of the stylus
on the record will deviate, resulting in distorted sound.
Publicité
