Publicité
Figure 22
1. Washout port
4.
Turn the water on.
5.
Start the engine and run it until there are no more
clippings that come out from under the machine.
6.
Shut off the engine.
7.
Shut off the water and disconnect the garden
hose from the machine.
8.
Start the engine and run it for a few minutes to
dry the underside of the machine.
9.
Shut off the engine and allow it to cool.
Folding the Handle
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1.
Remove the electric-start button (if equipped);
refer to
Figure
23.
All manuals and user guides at all-guides.com
g014538
15
Figure 23
1. Electric starter
2.
Loosen the handle knobs.
3.
Rotate the entire handle forward
Important:
Route the cables to the outside
of the handle knobs as you fold the upper
handle.
Figure 24
4.
Rotate the upper portion of the handle back
toward the engine; refer to
Figure 25
1. Handle knobs
g186627
2. Electric-start button
(Figure
24).
g038688
Figure
25.
g038687
Publicité
