Sony VPH-D50HTU Mode D'emploi page 27

4
Make adjustment or setting on the menu.
To change the adjustment level
To increase the level, press the V or b key.
To decrease the level, press the v or B key.
Then press the ENTER key to store the level. The
original screen is restored.
C O N T R A S T : 8 0
To select an item
Use the v or V key to select an item in a pop-up menu,
then press the B key or the ENTER key. The selected
setting is stored and the pop-up menu disappears.
Pop-up menu
V I D E O M E M O R Y : O F F
INPUT
SELECT 1
C O N T R A S T 2
PIC
CTRL B R I G H T 3
C O L O R 4
INPUT
SETTING H U E 5
S H A R P
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER EXIT: MENU
For details on setting individual items, see the relevant
menu pages.
To clear the menu display
Press the MENU key.
The menu display also disappears automatically if no
key is pressed for about one minute.
To reset the settings that have been
adjusted
Press the RESET key. "Reset complete!" appears on
the screen and the settings appearing on the screen will
be reset to the factory preset or service adjusted levels.
Memory of the settings
The settings in the menus are automatically stored in
the projector memory. You can also store the setting
by pressing the MEMORY key.
27
(GB)