Features
Multiscan projector
High resolution and brightness
Easy operation—remote control, on-screen display
Compatible with various color systems
Flexible setup
Illuminated control panel/remote control keys
..........................................................................................................................................................................................................
1) NTSC
is the color system used when playing back a video recorded on NTSC on a NTSC
4.43
6
(GB)
This projector accepts and automatically detects horizontal scanning
frequencies between 15 kHz and 64 kHz and vertical scanning frequencies
between 38 Hz and 150 Hz.
In addition to high-resolution pictures from computers, you can also
project pictures from teletext decoders, VCRs and video cameras.
A newly developed 7-inch CRT and a hybrid Sony HACC (High-
resolution Aspherical and Color Corrected) lens are incorporated in the
projector to provide a sharp and bright high-quality picture with the high
resolution of 1280 × 1024 pixels and the high light output of 160 lumen.
Adjustments such as input selection, picture control and centering
adjustment can be remotely controlled from both the front and rear of the
projector with the supplied remote control RM-PJ1001. You can also use
the control as a wired remote control by connecting it to the projector with
the supplied remote control cable.
Selecting the input signal or video memory number can be done easily
with the supplied remote control RM-PJD50.
NTSC, PAL, SECAM, NTSC
automatically or manually.
You can project a 60- to 250-inch picture (100-inch standard) with this
projector. The projector can be set up on the floor or ceiling, for front or
rear projection to suit the installation location, surrounding illumination,
usage, etc.
The key names on the remote control and the control panel of the projector
can be illuminated for easy access in a dark place by pressing the LIGHT
button.
1)
or PAL-M color system can be selected
4.43
system VCR.
4.43