Light Button - Sony VPH-D50HTU Mode D'emploi

Location and Function of Controls
Remote Control RM-PJ1001
The remote control RM-PJ1001 may be used as a
wired or wireless remote control.
The keys with the same names as those on the control
panel have the same functions.
@¢
@£
@™
@¡
@º
!ª
!•
!¶

1 LIGHT button

Illuminates the key indicators when the COMMAND
switch 5 is set to ON. If the COMMAND switch is
set to OFF, only the COMMAND switch is
illuminated. The key indicators turn off if you press
the LIGHT button again.
If you do not press any key for more than 30 seconds,
the indicators also turn off automatically.
When the remote control is connected to the
CONTROL S IN/PLUG IN POWER jack of the
projector via the remote control cable, the power is
supplied to the remote control from the projector.
14
(GB)
The VOL +/– !™, INPUT SELECT C and D !•, LCD
LENS CONTROL @¡ and AUDIO MUTING @£ keys do not
function with this projector.
1 2 3 4 5 6 7
LIGHT
MUTING STATUS COMMAND
OFF ON
PIC AUDIO OFF ON
RGB CENT
NORMAL DOT PHASE SIZE SHIFT R
APA
LCD LENS CONTROL
PATTERN ZOOM SHIFT FOCUS B
INPUT SELECT
VIDEO BLKG RESET FUNCTION
SELECT SYS SET
VIDEO/S VIDEO
PICTURE CONTROL
A B C D
SWITCHER/VIDEO MEMORY/INDEX
1 2 3 4
5 6 7 8 SHARP
SW NO/
VIDEO MEMORY
9
10/0(ALL) OFF/GROUP
SWITCHER INDEX
!§
!∞ !¢
2 Transmission indicator
Lights each time you press a key. If it does not light,
replace the batteries with new ones.
3 STATUS ON/OFF keys
Press OFF to eliminate the on-screen display.
Press ON to restore the on-screen display.
The menus and warning messages appear even if the OFF
key is pressed.
Note
8
STANDBY ON
MEMORY MENU
ENTER
BRIGHT CONTR POSITION
HUE COLOR VOL
!£
Note
9
!º
!¡
!™