Deleting Recordings; Adjusting Date And Time; Signal Sound; Automatic Recording In Case Of Movement - Monacor DMR-123LCD Mode D'emploi

5.6.2 Deleting recordings

GB
DELETE ONE
DELETE ALL
If DELETE ONE is selected and confirmed with the
button , the display changes to the overview of the
recordings. Then it is possible to delete individual
recordings, as described in chapter 5.5.
For deleting all recordings from the memory card,
select DELETE ALL and confirm with the button
Then the following safety request appears:
YES
Select with the button
recordings are to be deleted (YES) or not (NO) [the
present selection is shown in a flashing way] and con-
firm with the button

5.6.3 Adjusting date and time

2007/6/5
08:15:00
DISPLAY ON
Change with the buttons
positions for year/month/day and hour/minute/second.
Adjust the present values with the buttons
(8). The option DISPLAY indicates whether date and
time are to be shown on the display (ON) or not (OFF).
In addition, this adjustment determines if the time of
recording will be memorized as a text in the individual
pictures of the function "Capture".
To exit the menu, press the button

5.6.4 Signal sound

ON
OFF
This adjustment switches the acoustic signal ON or
OFF for remote release of the function "Capture" and
for the automatic recording in case of motion detection
(⇒ Chapter 5.6.5). All other signal sounds are not
affected by this adjustment.
Select the desired option with the buttons
(8) [the present adjustment is shown in a flashing
way] and confirm with the button
14
DELETE
DELETE
NO
or (6) whether really all
.
TIME SET
and (6) between the
BEEP
(9).

5.6.5 Automatic recording in case of movement

If this function is switched ON, a video sequence of a
few seconds is automatically recorded when a move-
ment is recognized in the camera picture. Then a sig-
nal sounds if "BEEP" has been permitted in the menu
item (⇒ Chapter 5.6.4).
Select the desired option with the buttons
.
(8) [the present adjustment is shown in a flashing
way] and confirm with the button

5.6.6 Automatic overwrite

If this function is switched ON, while recording, as
soon as the memory card is full, the respectively oldest
recording is deleted and overwritten by the new re-
cording. Thus, a continuous recording is possible so
that it is not necessary to delete the memory card
manually or to change it in the meantime.
Select the desired option with the buttons
(8) [the present adjustment is shown in a flashing
way] and confirm with the button

5.6.7 Capture recording mode

and
This adjustment determines the type of recording with
(9).
the function "Capture" (⇒ Chapter 5.3).
With "SNAP 1 JPG" a picture file is generated in the
JPEG format, while with "VIDEO 5 SEC" and "VIDEO
10 SEC" a video sequence with sound is generated in
the ASF format of 5 s or 10 s length.
Select the desired option with the buttons
(8) [the present adjustment is shown in a flashing
way] and confirm with the button

5.7 Operation with the infrared remote control

Except for the button
the recorder are also available on the IR remote con-
and trol so that the operation described before can also be
made alternatively via the remote control. For this pur-
pose align the remote control to the IR receiver (23).
MOTION DETECT
ON
OFF
OVERWRITE
ON
OFF
CAPTURE MODE
SNAP
VIDEO
VIDEO 10 SEC
(3), all operating buttons of
and
(9).
and
(9).
1 JPG
5 SEC
and
(9).