Care and maintenance
All manuals and user guides at all-guides.com
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the water.
They should be cleaned if you wish to achieve the best results
in every wash.
filter is loose.
clean it thoroughly under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction and
pull it out
2.
side flaps
3. Slide out the stainless-steel plate filter A.
4. Inspect the trap and remove any food residues. NEVER
REMOVE the wash-cycle pump protection
After cleaning the filters, re-place the filter assembly and fix it in
position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
*
Only available in selected models.
Clean the filters regularly.
The dishwasher should not be used without filters or if the
B by exerting a slight pressure on the
off the water tap.
empty.
EN
(fig. 3).
(black detail) (fig.4).
27