Problem
You can hear a constant beep
noise.
comes on.
If you cannot find a solution...
If you cannot find a solution to the problem yourself,
contact your dealer or an Authorised Service Centre.
Give the data from the rating plate. Give also three digit
letter code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on.
Technical data
Cooking zones specification
Cooking zone
Middle front
Middle rear
Possible cause
The electrical connection is incor-
rect.
The second phase of the power sup-
ply is missing.
Nominal Power (Max heat setting) [W]
1200
700 / 1700
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
Check if the hob is correctly connected
to the electrical supply. Remove the
fuse, wait one minute, and insert the
fuse again.
Make sure, you operated the hob correctly. If not the
servicing by a service technician or dealer will not be
free of charge, also during the warranty period. The
instructions about the Service Centre and conditions of
guarantee are in the guarantee booklet.
Cooking zone diameter [mm]
145
120 / 180
Remedy
27