Publicité
•
you spill something or put something on the control
panel for more than 10 seconds (a pan, a cloth,
etc.). An acoustic signal sounds and the hob
deactivates. Remove the object or clean the control
panel.
•
you do not deactivate a cooking zone or change the
heat setting. After some time
hob deactivates.
The relation between the heat setting and the time
after which the hob deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The heat setting
Touch
to increase the heat setting. Touch
decrease the heat setting. Touch
same time to deactivate the cooking zone.
Activating and deactivating the outer rings
You can adjust the surface you cook to the dimension of
the cookware.
Use sensor field:
To activate the outer ring: touch the sensor field. The
indicator comes on.
To deactivate the outer ring: touch the sensor field
until the indicator goes out.
Timer
Count Down Timer
•
You can use this function to set the length of a single
cooking session.
First set the heat setting for the cooking zone, then set
the function.
To set the cooking zone: touch
indicator of a cooking zone appears.
To activate the function or change the time: touch
or
of the timer to set the time (00 - 99 minutes).
When the indicator of the cooking zone starts to flash,
the time counts down.
comes on and the
The hob deactivates af-
ter
6 hours
5 hours
4 hours
1.5 hour
to
and
at the
repeatedly until the
To see the remaining time: touch
cooking zone. The indicator of the cooking zone starts
to flash. The display shows the remaining time.
To deactivate the function: touch
cooking zone and then touch
counts down to 00. The indicator of the cooking zone
disappears.
When the countdown ends, an acoustic
signal sounds and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
•
Minute Minder
You can use this function when the hob is activated and
the cooking zones do not operate. The heat setting
display shows
.
To activate the function: touch
or
of the timer to set the time. When the time
finishes, an acoustic signal sounds and 00 flashes.
To stop the sound: touch
To deactivate the function: touch
. The remaining time counts down to 00.
The function has no effect on the
operation of the cooking zones.
Pause
This function sets all cooking zones that operate to the
lowest heat setting.
When the function operates, all other symbols on the
control panels are locked.
The function does not stop the timer functions.
Touch
to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch
heat setting comes on.
Lock
You can lock the control panel while cooking zones
operate. It prevents an accidental change of the heat
setting.
Set the heat setting first.
To activate the function: touch
seconds. The Timer stays on.
to set the
to set the
. The remaining time
.
and then touch
.
and then touch
. The previous
.
comes on for 4
23
Publicité
