Publicité
You can see the battery type, battery cell, charge current and discharger current when a
memory number has preset values.
[ BATT MEMORY 1 ]
LiPo 7.4V ( 2S )
b) Recalling a Preset
1. In the "BATT MEMORY" menu, press the DEC. or INC. button to select a memory number
with preset values.
[ BATT MEMORY 1 ]
LiPo 7.4V ( 2S )
2. Press and hold the ENTER button for 3 seconds to recall the preset and start the charging
process.
ENTER CHARGER
LOAD...
16. SYSTEM SETTING
All values in the system setting are default values when it is powered on for use for the first
time. Press the DEC. or INC. button to browse the items in the system setting. Refer to the table
below for details.
You can change the values in each configuration option. To do so, press the ENTER button
so that a changeable value starts blinking. Change the blinking value with the DEC. and INC.
buttons and then press the ENTER button once to save the change.
58
All manuals and user guides at all-guides.com
[ BATT MEMORY 1 ]
C: 4.9A
D: 2.2A
Publicité
