Publicité
As a conventional burner
By default, the flexible cooking zone can be used as a
single burner.
Activate this function
The cooktop
must be turned on.
1. Select the flexible cooking zone with the symbols _
•
I'_ I'_
or
La.Lalights up in the element display.
2. Set the desired power level with the number keys.
The flexible cooking zone is activated.
Changing the heat setting
Change the heat setting on the control panel.
Add another piece of cookware
Select the flexible cooking zone and touch the
Flex ON symbol. The element will detect the new piece of
cookware.
The previously set power level will be maintained.
Note:
When you lift or remove cookware
from an
activated element the element will automatically
try to
detect the cookware. The previously set power level is
maintained.
Turning off this function
Select the cooking zone and touch the Flex OFF symbol.
As two burners
The flexible cooking zone can be used as two
independent
burners.
Activating this function
1. Select the flexible cooking zone and touch the Flex
OFF symbol. The indicator -- lights up between the C-
and _" symbols.
2. Select one of the flexible cooking zones. La.Lalights up
in the element display.
3. Set the power level with the number keys.
The function is switched off by:
selecting the burner and pressing the 0 symbol. The
burner switches off.
Note: tf the cooktop is switched off and on again, the
flexible cooking zone is switched to operation as a single
burner again.
SpeedBoost
function
The SpeedBoost
function can be used to heat lar.ge
amounts of water faster than by using heat level SI.
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture), tf this is not the case, the b and _ symbols will
flash on the selected element display; then it will
automatically
set the power level _.
Group 1
Group 2
Note: You can achieve maximum power on the flexible
cooking zone by placing just one piece of cookware
in
the middle of the cooking zone as described
in the
Flexible Cooking Zone chapter.
Setting SpeedBoost
1. Select an element.
2. Touch Speed Boost. The function is set.
Turning SpeedBoost off
1. Select an element on which SpeedBoost
is set.
2. Touch Speed Boost. The function is deactivated.
Note:
In certain circumstances,
the function may be
deactivated
automatically
to protect the internal
electronic
components
of the cooktop.
Cook time
You can use the timer function to set a cook time for any
element. The element will turn off automatically
once the
set time has elapsed.
• ,
CAUTION
@
@
@
When using the timer, always keep an eye on the
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
power switch after each use.
13
Publicité
