Publicité
EN
1. EDIFIER ConneX app
With this app, you can
•Switch input modes,
•Control play,
•Select or customize EQs,
•Upgrade the firmware, and
•More functions.
Download EDIFIER ConneX app
1. With your smart device, scan the QR code on the quick start guide or the
packaging.
•You can also search for "EDIFIER ConneX" in Apple App Store (iOS devices) or
Google Play (Android devices).
2. Download and install the app.
How to use this app
1. Connect your smart device with the speaker via Bluetooth.
2. In Bluetooth mode, open EDIFIER ConneX App on your smart device.
3. Tap the menu for settings and playback control.
Note: The BLE connection between your smart device and the speaker remains
active even if the speaker is switched to non-Bluetooth input modes.
2. What's in the box?
Speaker connecting cable
3.5mm to 3.5mm audio cable
3.5mm to RCA audio cable
USB-C to USB-C cable
Note:
•Images are for illustrative purpose only and may differ from the actual product.
•The bundled USB connecting cable is for audio streaming only. Do not use it
for device charging.
•For the need of technical improvement and system upgrade, information and
specifications contained herein may be slightly different from actual product.
If any difference is found, the actual product prevails.
3. Cable connection
Note:
* Power input: 100-240V~ 50/60Hz 400mA
* This plug type is meant for illustration purpose only.
4. Standby & wake-up
Note:
To switch the speaker to standby mode or work mode, tap and hold the "
button on the speaker.
5. Source selection
6. Bluetooth connection
Note:
•Pin code for connection is "0000" if needed.
•To enjoy all Bluetooth functions of this product, make sure that your audio
source device supports A2DP and AVRCP profiles.
•If no device is connected in 10 minutes, the speaker will switch to Bluetooth
hidden mode. The "
mode, (1) new devices cannot find the speaker, but (2) for a device that exists
in the pairing record of this speaker, you can select "EDIFIER M60" from its
Bluetooth device list to reconnect. To exit from Bluetooth hidden mode, tap
the "
" button on the speaker.
•To disconnect from the current Bluetooth device, tap and hold the "
"-" buttons on the speaker for 1.5 seconds.
7. USB connection
Note:
The following operating systems support USB audio streaming: Windows 11,
Windows 10, Windows 8, and Windows 7.
8. Play control
Note:
In AUX and USB modes, volume sync is not supported. To adjust the volume,
adjust on the speaker and your device separately.
9. Specifications
Total output power (RMS): L/R (Treble): 15W+15W
Frequency response: 58Hz-40kHz
Declaration for EU
Frequency Band: 2.402GHz ~ 2.480GHz
RF Power Output: ≤ 10 dBm (EIRP)
There is no restriction of use.
10. Troubleshooting
Cannot connect to your Bluetooth device
• Make sure that the distance between this product and your Bluetooth device
is less than 10 meters and there are no obstacles between them.
• Make sure that no device is connected to this product via Bluetooth.
• Make sure that this product is in Bluetooth pairing mode. If not, manually
switch it to this mode.
• Restart this product, enable Bluetooth function on your Bluetooth device,
and then try again.
No power
• Make sure that the power cable is properly connected.
• Make sure that the power supply is not disconnected.
No sound
• Make sure that this product is powered on.
• Make sure that this product and your device is properly connected.
• Make sure that the playback is not paused.
• Make sure that this product and your device are not muted.
• Increase the volume of this product and your device.
Noise coming from speakers
• EDIFIER speakers generate little noise, while the background noise of some
audio devices are too high. Please unplug audio cables and turn the volume
up. If no sound can be heard at 1 meter away from the speaker, there is no
problem with this product.
To learn more about EDIFIER, please visit www.edifier.com
For EDIFIER warranty queries, please visit the relevant country page on
www.edifier.com and review the section titled Warranty Terms.
USA and Canada: service@edifier.ca
South America: Please visit www.edifier.com (English) or
www.edifierla.com (Spanish/Portuguese) for local contact information.
Multimedia Speaker
Passive speaker
Power cable
Settings
Bluetooth
DEVICES
EDIFIER M60
" button backlight will be in a breathing pattern. In this
L/R (Mid-range and bass): 18W+18W
M60
Manual
x1
USB IN
AUX IN
2:12
Bluetooth
/ USB IN /
AUX IN
AUX IN
AUX IN
/ USB IN
/ USB IN
EDIFIER ConneX app
Active speaker
Speaker stands
Quick start guide
Important safety instructions
1.5s
1.5s
EDIFIER M60
"
" and
x1
x1
x1
x1
Publicité
