Publicité
Insert the optical head above
the attachment, using the
2mm Allen wrench to tighten
the screw. (Fig.2)
Insert both eyepieces into
the tubes of the optical head.
(Fig.3)
Insert the condenser under
the stage: position until it is
well inserted into its holder
(under the condenser there is
a pin that must fully enter the
guide of the holder). (Fig. 4)
Mount the stage: lower the
support using the coarse
focus knob, then place the
stage and firmly tighten the
lock screw. (Fig.5)
All manuals and user guides at all-guides.com
Page 7
Fig.2
Fig.3
AFTER INSERTING THE
CONDENSER, TIGHTEN
THIS SCREW
Fig.4
Fig.5
Publicité
