Publicité
INSTALLATION INSTRUCTION
• DO NOT USE IN AREAS WITH LIMITED VENTILATION OR OUTSIDE THE RATED AMBIENT TEMPERA-
TURE RANGE. *CONNECT WITH WATERPROOF CABLE HOUSE ONLY. *ENSURE ELECTRICITY IS
SWITCH OFF BEFORE INSTALLATION.
• Please do not mount to a surface that is prone to vibrations .*
• Remove the screw and the bracket a erward. (Figure 1)Before drilling, mark the hole position for fixing
the bracket onto the wall (Screw not supplied). (Figure 2)
• Screw the retaining bracket to the wall with a suitable quantity of screws. (Figure 3)
• Mount the bracket back to the fixture. Adjust the floodlight according to the desired position. Tighten
the screw. (Figure 4) Connect your main cable (H05RN-F3G1.0mm2 Recommended) with the input lead
of our product through the waterproof junction box. Note, the line (-) of the lead. (Figure 5) (Need to use
the junction box of IP65 or above, ensure to tighten the waterproof screw) Switch on the power to make
sure if the product Is working.
DISMANTLING INSTRUCTIONS
(For Market surveillance team only)
Note: Light source removal will void the warranty
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.
V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Publicité
