Publicité
˜ Adjusting the watch strap (HG03879D)
See Fig . E:
˜ Removing segments
Note: The segments which can be removed are marked with an arrow (see Fig . E) . They
are connected together with pins . These can be pushed out in the direction of the arrow
with the repair set 10 . Use a pair of tweezers (not included) if necessary in order to
remove the pins .
Place the watch with the dial facing downwards in the repair set 10 .
Remove the pins of the segment that you wish to remove (as described above) and
take out the segment 9 .
Note: If you would like to take out more than one consecutive segment 9 , it is
sufficient to remove the two outer pins .
Connect the watch strap together again by joining the loose segments 9 with a
pin . Press this pin against the direction of the arrow into the adjacent segments 9 .
10
GB/IE/NI
Adjust the watch strap by removing segments 9 (2 spare
changeable links are included) . To this purpose you should use the
repair set 10 supplied .
Publicité
