Télécharger Imprimer la page

Scosche Industries EGMT249F Manuel D'installation page 7

Publicité

2004-08 Chevrolet SSR
RADIO REMOVAL:
1. Using a panel removal tool remove the
aluminum trim that separates the dash.
2. Remove six (6) 7mm hex screws securing
the dash panel.
3. Remove the dash by pulling towards you.
Use caution when removing the dash
around the passenger's air bag. Bend the
sides of the passenger air bag cover to release the passenger side of the dash.
4. Remove three (3) 7mm hex screws securing radio to the dash. Disconnect and remove
the radio.
NOTE: USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS AND DISCARD.
REMARQUE: UTILISEZ LES SUPPORTS OMBRÉS ET LES TROUS SPÉCIFIÉS. COUPEZ ET JETEZ LES SUPPORTS RESTANTS.
2002-UP Chevrolet Trailblazer
RADIO REMOVAL:
1. Extract (2) 9/32" screws from dash bezel.
2. Extract (1) Philips head screw from under
air conditioner control.
3. Extract (2) 9/32" screws
from above brake pedal.
4. Extract (2) 9/32" screws
from underneath.
5. Extract (2) Philips head screws
from instrument bezel, disconnect,
and remove.
NOTE: FOR THIS APPLICATION, USE SPACERS AND THE SHADED BRACKETS. CUT OFF THE REMAINING BRACKETS AND DISCARD.
(SEE ILLUSTRATION).
REMARQUE: POUR CETTE APPLICATION, UTILISEZ LES ENTRETOISES ET LES SUPPORTS OMBRÉS. COUPEZ ET JETEZ LES
SUPPORTS RESTANTS. (VOIR L'ILLUSTRATION)
2000-05 Chevrolet Monte Carlo
RADIO REMOVAL:
1. Extract (1) Phillips head screw
from glove box.
2. Remove cylinder cover from
around ignition keyhole.
3. Extract (2) Phillips head screw
from beneath steering column
plate, and remove cover.
4. Remove fuse access cover
and remove (1)
Phillips head screw from behind.
5. Adjust steering wheel column down and
remove dash trim bezel. Disconnect
hazard switch and remove panel.
NOTE: FOR THIS APPLICATION, USE SPACERS AND THE SHADED BRACKETS. CUT OFF THE REMAINING BRACKETS AND DISCARD.
(SEE ILLUSTRATION).
REMARQUE: POUR CETTE APPLICATION, UTILISEZ LES ENTRETOISES ET LES SUPPORTS OMBRÉS. COUPEZ ET JETEZ LES
SUPPORTS RESTANTS. (VOIR L'ILLUSTRATION)
USE SHADED BRACKETS
USE SHADED BRACKETS
UTILISEZ LES
SUPPORTS OMBRÉS
USE SHADED SPACERS
UTILISEZ LES ENTRETOISE OMBRÉS
USE SHADED BRACKETS
UTILISEZ LES
SUPPORTS OMBRÉS
USE SHADED SPACERS
UTILISEZ LES ENTRETOISE OMBRÉS
7
UTILISEZ LES
SUPPORTS OMBRÉS

Publicité

loading