Publicité
2000-05 Pontiac Bonneville
RADIO REMOVAL:
Note: The factory stereo provision is for a Double
DIN radio.
1. Remove (2) plastic fasteners from dash bezel
above instrument cluster.
2. Pull bezel out and up, disconnect and remove.
Pull radio out by depressing fi nger tabs,
and remove.
NOTE: USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS AND DISCARD.
REMARQUE: UTILISEZ LES SUPPORTS OMBRÉS ET LES TROUS SPÉCIFIÉS. COUPEZ ET JETEZ LES SUPPORTS RESTANTS.
2001-05 Pontiac Grand Am
RADIO REMOVAL:
1. Use a panel removal tool to pry out radio
dash bezel, unplug electrical connectors
and remove bezel.
2. Extract (3) 7mm screws from radio.
NOTE: USE THE SHADED BRACKETS & THE INDICATED HOLE LOCATIONS. CUT OFF THE REMAINING BRACKETS AND DISCARD.
REMARQUE: UTILISEZ LES SUPPORTS OMBRÉS ET LES TROUS SPÉCIFIÉS. COUPEZ ET JETEZ LES SUPPORTS RESTANTS.
2002-08 Pontiac Vibe
2002-04 Toyota Matrix
RADIO REMOVAL:
1. Carefully pry out Dash/Radio trim bezel
using nylon tool or panel removal tool.
Lift from bottom and remove.
2. Unplug switch harnesses and remove.
3. Extract (4) 10mm bolts securing radio
brackets, disconnect and remove.
NOTE: FOR THIS APPLICATION, MAKE SURE THE POCKET IS ON THE BOTTOM. USE THE SHADED BRACKETS. CUT OFF THE
REMAINING BRACKETS AND DISCARD. (SEE ILLUSTRATION).
REMARQUE: POUR CETTE APPLICATION, ASSUREZ-VOUS QUE LA POCHE EST SUR LE FOND. UTILISEZ LES SUPPORTS
OMBRÉS ET LES TROUS SPÉCIFIÉS. COUPEZ ET JETEZ LES SUPPORTS RESTANTS. (VOIR L'ILLUSTRATION)
2000-03 Saturn SL, SC, SW Series
RADIO REMOVAL:
1. Extract (2) 7 mm screws from drivers
instrument panel located between
the door and vent.
2. Using panel removal tool,
remove dash bezel.
3. Extract (2) 7 mm screws from radio,
disconnect and remove.
NOTE: FOR THIS APPLICATION, MAKE SURE THE POCKET IS ON THE BOTTOM. USE THE SHADED BRACKETS. CUT OFF THE
REMAINING BRACKETS AND DISCARD. (SEE ILLUSTRATION).
REMARQUE: POUR CETTE APPLICATION, ASSUREZ-VOUS QUE LA POCHE EST SUR LE FOND. UTILISEZ LES SUPPORTS
OMBRÉS ET LES TROUS SPÉCIFIÉS. COUPEZ ET JETEZ LES SUPPORTS RESTANTS. (VOIR L'ILLUSTRATION)
USE SHADED BRACKETS
USE SHADED BRACKETS
SUPPORTS OMBRÉS
USE SHADED BRACKETS
UTILISEZ LES
SUPPORTS OMBRÉS
11
USE SHADED BRACKETS
UTILISEZ LES
SUPPORTS OMBRÉS
UTILISEZ LES
SUPPORTS OMBRÉS
UTILISEZ LES
Publicité
