Publicité
CONTROL DESCRIPTIONS
The appliance is equipped with the
listed control devices, required to
run its main functions.
A) Thermoregulator: used to adjust
the temperature.
Press button (A1) while simultane-
ously pressing button (A2) or (A3)
to reduce or increase the value.
Hold down buttons until the re-
quired temperature appears on the
display.
B) Burner control knob: used to
turn on, off and adjust the top
burner.
EN
Position (B1): gas supply off
Position (B2): burner flame set to
maximum power.
Position (B3): burner flame set to
minimum power.
C) Burner control knob: used to
turn on, off and adjust the bottom
burner.
Position (C1): gas supply off
Position (C2): burner flame set to maximum power.
Position (C3): burner flame set to minimum power.
D) Burner control knob: used to turn on, off and regulate the multi-burner and to ignite
the pilot flame.
Position (D1): gas supply off
Position (D2): pilot flame ignition on.
Position (D3): burner flame set to maximum power.
Position (D4): burner flame set to minimum power.
E) Piezoelectric switch: used to ignite the pilot flame.
Pilot flame ignition is only enabled if the knob (D) is in position (D2).
F) Main switch: used to turn electrical power on and off.
G) Switch: used to turn the light in the appliance processing chamber on and off.
All manuals and user guides at all-guides.com
A
A1
B
C
D1
D
E
F
- 22 -
PIZZA OVENS
(GAS POWERED)
A2
A3
B1
B2
B3
C1
C2
C3
D2
D3
D4
G
IDM-34601500400.tif
English language
Publicité
