Publicité
All manuals and user guides at all-guides.com
Use
Switching on and off (fig. A)
•
Insert the mains plug into the wall socket.
•
To switch on the appliance, turn the
thermostat dial (1) to set the required
temperature. The temperature indicator
(2) remains on while the grill plate (3) is
being heated. The temperature indicator
(2) goes off when the grill plate (3) has
reached the required temperature.
•
While the appliance is switched on, the
temperature indicator (2) will illuminate
and extinguish as the thermostat switches
the heating elements on and off to
maintain the required temperature.
•
To switch off the appliance, turn the
thermostat dial (1) fully to the left.
•
Remove the mains plug from the wall socket.
Setting the temperature (fig. A)
•
Turn the thermostat dial (1) to the right to
increase the temperature of the grill plate
(3).
•
Turn the thermostat dial (1) to the left to
decrease the temperature of the grill plate
(3).
Hints for optimum use
•
Prepare the ingredients.
•
Clean the grill plate with a damp cloth.
•
Place the appliance on a stable and flat
surface.
•
Insert the mains plug into the wall socket.
•
Turn the thermostat dial to set the required
temperature.
•
Wait for approximately 10 minutes until
the grill plate has reached the required
temperature.
•
Note: Small pieces will grill or fry better
and more quickly than large pieces.
•
Set the thermostat to suit the ingredients.
Experiment with the required cooking time
and the required temperature to achieve
the best results.
•
After use, switch off the appliance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
Cleaning and maintenance
Before you proceed, we need you to pay
attention to the following notes:
Before cleaning or maintenance, remove
the mains plug from the wall socket and
wait until the appliance has cooled down.
Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
Do not use aggressive or abrasive cleaning
agents to clean the appliance.
Do not use sharp objects to clean the
appliance.
•
Regularly check the appliance for possible
damage.
•
Clean the grill plate after each use:
Remove any residues with a paper towel.
Clean the grill plate with a damp cloth.
Thoroughly dry the grill plate.
•
Clean the outside of the appliance with a
damp cloth. Dry the outside of the appliance
with a clean, dry cloth.
•
After cleaning, put the appliance in the
original packaging.
•
Store the appliance in a dry place, out of
the reach of children.
U.K. Wiring instructions
The wires in the mains lead are coloured in
accordance with the following code:
BLUE
NEUTRAL
BROWN
LIVE
GREEN/YELLOW
EARTH
As the colours of the wire in the mains lead of
this appliance may not correspond with the
colour markings identifying the terminals on
your plug, proceed as follows:
The wire which is coloured BLUE must be
connected to the terminal which is marked
with the letter N or coloured black.
The wire which is coloured BROWN must be
connected to the terminal which is marked
with the letter L or coloured red.
The wire which is coloured GREEN/YELLOW
must be connected to the terminal which is
marked with the letter E or (
GREEN or GREEN/YELLOW.
9
) and is coloured
Publicité
