Publicité
UNBOX YOUR BIKE
Cut the packaging straps using wire cutters
1.1
or a box cutter. Just make sure not to dam-
age the YT BikeBox. Now you can pull out
the flaps and open it.
Now you can lift your bike upwards, out of
1.3
the box.
0 6 y t
All manuals and user guides at all-guides.com
Lift the wheels out of the box. Put the wheels
1.2
in a safe place on the side of the box.
Place the frame on the front /rear axle stand.
1.4
Make sure the bike is standing safely!
HANDLEBAR ASSEMBLY
Cut the zip ties with a wire cutter.
Grease the threads of the screws. Mount the
2.1.1
2.1.2
stem base plate on the upper fork crown using
the shorter, rear-side bolts (Allen key 5 mm).
Using the longer bolts, mount the stem
Make sure to begin in this order and tighten
2.1.4
2.1.5
clamps to the upper fork crown through the
the bolts to the specified torque. Also en-
holes in the middle of the stem base plate.
sure that there is no gap between the stem
clamps and the stem base plate in this step
(zero gap).
RENTHAL FATBAR
Tighten the bolts. Please follow the torque
2.1.3
specifications of the manufacturers
Now mount the forward bolts of the stem
2.1.6
clamps to the base plate. Pay attention to the
torque recommendations, even clamp gaps,
and the correct alignment of the handlebar.
The adjustment graphics will help you with
this.
y t 0 7
Publicité
