Publicité
Precautions for installation
Precautions for installation
This camera is designed to be used
This camera is designed to be used
indoors. This camera is not operable
indoors. This camera is not operable
outdoors.
outdoors.
Do not operate this product beyond the
Do not operate this product beyond the
specified temperature, humidity or power
specified temperature, humidity or power
source ratings.
source ratings.
Use this product at temperatures within
Use this product at temperatures within
–10 °C to +50 °C {14 °F to 122 °F}, and
–10 °C to +50 °C {14 °F to 122 °F}, and
humidity below 90 %.The input power source
humidity below 90 %.The input power source
is 12 V DC/24 V AC (WV-CP294) or 120 V AC
is 12 V DC/24 V AC (WV-CP294) or 120 V AC
(WV-CP290).
(WV-CP290).
Installing place
Installing place
Contact your dealer for assistance if you
Contact your dealer for assistance if you
are unsure of an appropriate place in your
are unsure of an appropriate place in your
particular environment.
particular environment.
• Make sure that the installation area is
• Make sure that the installation area is
strong enough to hold the camera, such
strong enough to hold the camera, such
as a concrete ceiling.
as a concrete ceiling.
• If a ceiling board such as plaster board
• If a ceiling board such as plaster board
is too weak to support the total weight,
is too weak to support the total weight,
the area shall be sufficiently reinforced.
the area shall be sufficiently reinforced.
• Do not install this product in a humid or
• Do not install this product in a humid or
dust-laden environment.
dust-laden environment.
Otherwise, lifetime of the internal parts
Otherwise, lifetime of the internal parts
may be shortened.
may be shortened.
Avoid installing in the following locations.
Avoid installing in the following locations.
• Locations where it may get wet from rain
• Locations where it may get wet from rain
or water splash
or water splash
• Locations where a chemical agent is
• Locations where a chemical agent is
used such as a swimming pool
used such as a swimming pool
• Locations subject to steam and oil
• Locations subject to steam and oil
smoke such as a kitchen, Locations near
smoke such as a kitchen, Locations near
flammable gas or vapor
flammable gas or vapor
• Locations
• Locations
where
where
emissions are produced
emissions are produced
• Locations subject to strong magnetic
• Locations subject to strong magnetic
field or radio waves
field or radio waves
• Locations where it may be damaged by
• Locations where it may be damaged by
briny air such as seashores
briny air such as seashores
• Locations where the temperature is not
• Locations where the temperature is not
within –10 °C to +50 °C {14 °F to 122 °F}.
within –10 °C to +50 °C {14 °F to 122 °F}.
• Locations subject to vibrations (This
• Locations subject to vibrations (This
product is not designed for on-vehicle
product is not designed for on-vehicle
use.)
use.)
• Locations subject to condensation as the
• Locations subject to condensation as the
result of severe changes in temperature
result of severe changes in temperature
Avoid installing the camera in a place with
Avoid installing the camera in a place with
a high level of noise.
a high level of noise.
8
8
All manuals and user guides at all-guides.com
radiation
radiation
or
or
X-ray
X-ray
Installation near an air conditioner, an air
Installation near an air conditioner, an air
cleaner, a vending machine, or the like
cleaner, a vending machine, or the like
causes noise.
causes noise.
Avoid connections during a lightning
Avoid connections during a lightning
storm.
storm.
Otherwise, an electric shock may be caused.
Otherwise, an electric shock may be caused.
Be sure to remove this product if it is not
Be sure to remove this product if it is not
in use.
in use.
Keep the camera cable away from the
Keep the camera cable away from the
lighting cable.
lighting cable.
Failure to observe this may cause noise.
Failure to observe this may cause noise.
Radio interference
Radio interference
When the camera is used near TV/radio
When the camera is used near TV/radio
antenna, strong electric field or magnetic
antenna, strong electric field or magnetic
field (near a motor or a transformer), images
field (near a motor or a transformer), images
may be distorted and noise sound may be
may be distorted and noise sound may be
produced.
produced.
Mounting screws
Mounting screws
• Screws are not supplied with this
• Screws are not supplied with this
product.
product.
• Prepare them according to the material
• Prepare them according to the material
and strength of the area where the
and strength of the area where the
product is to be installed.
product is to be installed.
• Do not use an impact driver. Use of an
• Do not use an impact driver. Use of an
impact driver may damage the screws.
impact driver may damage the screws.
• The screws and bolts must be tightened
• The screws and bolts must be tightened
with an appropriate tightening torque
with an appropriate tightening torque
according to the material and strength of
according to the material and strength of
the installation area.
the installation area.
Power cord (only for WV-CP290)
Power cord (only for WV-CP290)
Connect the power cord securely. Run the
Connect the power cord securely. Run the
power cord so that no load is applied to the
power cord so that no load is applied to the
cord when panning or tilting the camera.
cord when panning or tilting the camera.
(Failure to observe this may disconnect the
(Failure to observe this may disconnect the
power cord, and accordingly no image is
power cord, and accordingly no image is
displayed.)
displayed.)
Publicité
