Publicité
• Backlight compensation selector [BLC]
• Backlight compensation selector [BLC]
ON: Compensates
ON: Compensates
automatically if it is brighter than the
automatically if it is brighter than the
object.
object.
OFF: This mode is used when the front of
OFF: This mode is used when the front of
the object is extremely bright.
the object is extremely bright.
Default setting: OFF
Default setting: OFF
Note:
Note:
• Under conditions such as extremely
• Under conditions such as extremely
strong
strong
backlight,
backlight,
compensation effect may not be
compensation effect may not be
achieved even with this mode set to
achieved even with this mode set to
ON to detect the backlight level.
ON to detect the backlight level.
• White balance selector[ATW/AWC]
• White balance selector[ATW/AWC]
ATW: Activates
ATW: Activates
the
the
temperature tracking mode. The
temperature tracking mode. The
camera continuously measures the
camera continuously measures the
color temperature of the light source
color temperature of the light source
and automatically adjusts the white
and automatically adjusts the white
balance. The adjustment of the color
balance. The adjustment of the color
temperature ranges from approx.
temperature ranges from approx.
2 700 K to 6 000 K.
2 700 K to 6 000 K.
AWC: Activates
AWC: Activates
the
the
balance
balance
control
control
adjustment is suitable for a location
adjustment is suitable for a location
where a light source is stable. The
where a light source is stable. The
adjustment of the color temperature
adjustment of the color temperature
ranges from approx. 2 000 K to
ranges from approx. 2 000 K to
10 000 K.
10 000 K.
Default setting:ATW
Default setting:ATW
• Synchronization mode selector[INT/LL]
• Synchronization mode selector[INT/LL]
Selects the camera synchronization mode
Selects the camera synchronization mode
as either internal sync mode (INT) or line-
as either internal sync mode (INT) or line-
lock mode (LL).
lock mode (LL).
INT:
INT:
Sets to internal 2:1 interlace
Sets to internal 2:1 interlace
Sets to line-lock mode
Sets to line-lock mode
LL:
LL:
Default setting: INT
Default setting: INT
Note:
Note:
• Please use the INT setting when 12 V
• Please use the INT setting when 12 V
DC is used (WV-CP294).
DC is used (WV-CP294).
All manuals and user guides at all-guides.com
the
the
background
background
the
the
desired
desired
automatic
automatic
color
color
automatic
automatic
white
white
mode.
mode.
This
This
11
11
Publicité
