Publicité
Location of identification data on the module
The type designation is shown on the appliance. Always
refer to this information when contacting our represent-
ative or service center.
2 Description
en
2.1 Use of the product as directed
The TE DRS‑M dust removal module is an accessory for
use with the Hilti TE 7, TE 7‑A, TE 7‑C, TE 6‑S and TE 6‑C
rotary hammers.
The dust removal module can be quickly and easily
attached to the power tool, i.e. the rotary hammer.
The dust removal module is not suitable for use when
chiseling or drilling in metals.
Please observe national regulations applicable to working
with materials hazardous to the health (e.g. asbestos).
The appliance is intended for professional use. The ap-
pliance may be operated, serviced and repaired only by
authorized, trained personnel. This personnel must be in-
formed of any special hazards that may be encountered.
3 Accessories
Designation
Round brush
Filter, complete
Suction head, complete
Protective cover
4 Technical data
Right of technical changes reserved.
Appliance
Rated power input
Suction performance
Weight
Dimensions (L x W x H)
Additional technical information
Operating stroke
Suitable TE‑C hammer drill bits (Ø)
Drill bit working length
Contact pressure
Dust container capacity
8
All manuals and user guides at all-guides.com
Type:
Serial no.:
The appliance and the power tool may present hazards
when used incorrectly by untrained personnel or when
used not as directed.
The working environment may be as follows: construction
site, workshop, renovation, conversion or new construc-
tion.
Tampering with or modification of the appliance is not
permissible.
In order to avoid the risk of injury, use the appliance
only in conjunction with the Hilti rotary hammers named
above.
2.2 Filter material
In addition to the standard filter, the TE DRS‑M dust
removal module is also available with a HEPA filter.
TE DRS-M
Max. 60 W
Max. 250 l/min
Max. 0.9 kg
384 mm x 78 mm x 263 mm
Max. 105 mm
4...16 mm
50...100 mm
15...25 N
20 to 130 holes (depends on drill bit diameter and hole
depth)
Publicité
