User Interface; Troubleshooting - Husqvarna 320iB Mark II Manuel D'utilisation

To do a check of the air intake
1. Make sure that the air intake is not blocked on any
side on the product.
2. Stop the product and remove leaves or unwanted
material if necessary.
CAUTION:
decreases the blowing capacity of the
product and increases the motor's

User interface

User interface
Green LED Flashes
Red error LED flashes
The product does not start
Red error LED flashes
Battery
LED display
Green LED flashing
788 - 004 - 19.05.2021
A blocked air intake

Troubleshooting

Possible faults
Low battery voltage.
Temperature deviation.
Dirt in battery connectors.
The battery is off.
The product needs servicing.
Possible faults
Low battery voltage.
working temperature. This can result in
motor failure due to overheating.
To examine the battery and the battery
charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
Possible action
Charge the battery.
Let the product cool down.
Clean with compressed air or a soft
brush.
Start the battery.
Contact your servicing agent.
Possible action
Charge the battery.
13