Publicité
4. Some grills have a spit rod slot on the firebox and
it is possible that the spit rod bracket (H) might not
fit your grill. In that case, slide the collar (E) onto
the spit rod (B). Let the collar (E) rest in the slot in
the side of firebox.
5. a) If you are using Item #0135116, please follow the
steps below:
Attach the motor bracket (X-Y-Z) and
spit rod bracket (H) to your grill at an angle using the
proper holes of your grill.
b) If you are using item #0371575, item #0271576,
or item #0067087, please follow the steps below for
using the rod extender:
1. If the supplied spit rod (B) is too short for your
grill, use the rod extender included in the
packaging of your grill.
2. Assemble the rod extender by putting the
threaded ends of the spit rod screws securely
into the female end of the rod extender.
Then follow steps 8, 9 and 10 to assemble the
other parts.
c) If you are using item #0271573 or item #0271574,
attach the rotisserie motor bracket supplied with your
grill and slide the rotisserie motor (A) onto the
bracket horizontally.
All manuals and user guides at all-guides.com
5
Fig. 4
Fig. 5a
hole
H
nut
Fig. 5b
B
Fig. 5c
A
A
X-Y-Z
D
F
G
Rod Extender
Publicité
