General Application Instructions - HBM U9C Notice De Montage

General application instructions

3 General application instructions
The force transducers are suitable for measuring tensile and compressive
forces. They provide highly accurate static and dynamic force measurements
and must therefore be handled very carefully. Particular care must be taken
during transport and installation. Dropping and knocking the transducer may
cause permanent damage.
The U9C series force transducers have two external threads into which the
forces to be measured must be applied.
The specifications in Chapter 9, Page 26, list the permissible limits for mechan­
ical, thermal and electrical stress. It is essential to observe these limits when
planning the measuring set-up, during installation and, ultimately, during opera­
tion.
U9C 9
A3815-1.4 HBM: public