Scope Of Supply And Equipment Variants - HBM U9C Notice De Montage

2

Scope of supply and equipment variants

S U9C force transducers
S U9C mounting instructions
S Manufacturing certificate
Equipment variants
All force transducers are available in different versions. The following options
are available:
1. Cable
The U9C is equipped with a cable 1.5m long in the standard version. You
can also order the force transducer with the following cable lengths:
- 3 m
- 5 m
- 6 m
- 7 m
- 12 m
2. Connector
We can mount one of the following connectors on the U9C if requested:
- SUB­D connector, 15-pin: 15-pin connector for connection to numerous
amplifier systems, e.g. MGCplus, Scout, MP85, etc.
- SUB­HG connector: 15-pin connector for connection to appropriate
amplifier systems, e.g. the HBM QuantumX system
- 3106 PEMV connector (Greenline): For connection to appropriate ampli­
fier systems, e.g. MGCplus with AP03.
- Free ends: Delivery of transducer without connector
3. TEDS
You can order the force transducer with transducer identification ("TEDS").
TEDS (Transducer Electronic Data Sheet) allows you to store the trans­
ducer data (characteristic values) in a chip that can be read out by a con­
U9C
Scope of supply and equipment variants
A3815-1.4 HBM: public
7