Publicité
3.1 Filling
Before filling the fireplace, the burner must be cooled down. The burner must not be removed from the
fireplace until the temperature is below 40 degrees, meaning that the temperature indicator is in the blue
area. When the fireplace is too hot, the temperature indicator will be in the red area and the spring blocks the
attachment of the Aduro funnel:
Illustration 1 – Placing the Aduro funnel
Follow this procedure when filling:
1. Make sure that the fireplace is turned off and that the temperature indicator is in the blue area.
2. Remove the burner from the fireplace to fill it with bioethanol wherever you store it (safe location).
Depending on the type of fireplace you have, follow the steps below to remove the burner:
Applies to Aduro B1:
•
Slide the front glass to the side. The integrated handle will now tilt upwards by 10 degrees:
Illustration 2 – Slide the front glass to the side
•
Raise the handle fully, lift the burner and remove it from the fireplace with one hand as shown
below. When the handle is fully raised, the latch for the burner will automatically cover the
burner opening.
Illustration 3 – Raise the handle and remove the burner
16
Publicité
