Publicité
WARNING: No helmet can
protect the wearer from all fo-
reseeable high or low speed impacts.
However, for maximum protection,
the helmet must be of proper fit and
the chin strap must be securely fas-
tened as described in this manual.
Failure to have a proper fit and to se-
curely fasten the chin strap is dange-
rous, as the helmet could come off in
an accident, resulting in severe head
injury or death.
measurement (from for Xs up to Xl).
To measure your head size, wrap a
tape measure horizontally around
2
S800 DOT-V02.indd 2
All manuals and user guides at all-guides.com
CHOOSE
YOUR SIZE
each helmet is designed
to correspond to a head
your head at a height of approxima-
tely one inch (2.5cm) above your
eyebrows. If your head measurement
falls between two sizes, first try on
the smaller helmet. However, be-
cause of different head shapes, this
size reference can only be considered
as a guide. For maximum protection,
it is necessary to check that the hel-
met is well suited for the shape of
your head. when trying a brand new
helmet, make sure that your head is
pushed into the helmet as far as pos-
sible, with the front part just above
your eyebrows, and with the chin
strap securely fastened as described
on the next page.
1. The helmet should feel very snug
all around your head and fairly tight
on the cheek pads. If not, it is too big
for you; select a smaller size.
see figure a.
B
13/04/06 10:21:28
Publicité
