Publicité
English
Fueling
Before fueling, clean the filler cap and
the area around it to ensure that no dirt
falls into the tank.
Always thoroughly shake the mixture in
the canister before fueling your
machine.
In order to reduce the risk of fire and
personal injury from escaping gas vapor
and fumes, remove the fuel filler cap
carefully so as to allow any pressure
build-up in the tank to release slowly.
After fueling, tighten fuel cap as securely
as possible by hand.
10
All manuals and user guides at all-guides.com
Starting / Stopping the
Engine
Controls
7
1 6
5 4
1
Stop switch
2
Throttle trigger lockout
3
Throttle lever
4
Tongue of throttle trigger
5
Catch
Positions of stop switch
6
I – normal run position – the engine
is running or can start
7
0 – engine off – the ignition is
switched off
Starting
2
3
Move the stop switch to I.
N
Press down the throttle trigger
N
lockout and hold it there.
Squeeze the throttle trigger until the
N
catch on the tongue (4) can be
engaged on the housing.
Now release the throttle trigger,
N
tongue and trigger lockout in that
order. This is the starting throttle
position.
4
KM 55 R, KM 55 RC
Publicité
