ResMed Swift LT Mode D'emploi page 8

Reassembling your Swift LT
1
Insert elbow into frame.
Reassembling the headgear
Lay out the headgear as
shown, writing facing
upwards.
Limited Warranty
ResMed warrants that your ResMed system, including its components: frame,
pillow sleeve, headgear, tubing and other accessories ("Product") shall be free
from defects in material and workmanship for a period of ninety (90) days from
the date of purchase by the initial consumer.
For further details refer to the Warranty.
2
Slide headgear clips onto
frame.
A
B
(A) Thread the top straps
through the top buckle,
then (B) back over to
secure.
7
3
Insert pillows into frame,
ensuring positioning
markers on cushion and
headgear are on the same
side.
A
B
(A) Thread both backstraps
through the back buckle
(Velcro™ facing outwards),
then (B) fold back over to
secure.