Publicité
8.5
Recommended fuel quality
Using fuel which does not comply with the following specifications exposes the equipment to irreversible damage not covered under
warranty:
-
Cleanliness and quality: ensure that the petrol used does not contain water and that it is fresh and clean (not out of date or
contaminated). For the
-
Octane rating: minimum octane rating of 87 (R+M)/2 or minimum octane rating of 90 (RON = Research Octane Number)
-
Blends: the use of unleaded petrol containing up to 10% ethyl alcohol is authorised (France: SP95-E10). It is not permitted
to use unleaded petrol containing less than 90% petrol, e.g. E15, E20 or E85. Blends of methyl tert-butyl ether (MTBE) and
unleaded petrol are approved (up to a maximum of 15% MTBE by volume).
However, it is strongly recommended that the same type of fuel is used throughout the complete service life of the unit. If the unit is
used infrequently (less than once a month), use new fuel with each use or add a stabilizing additive to the fuel tank.
8.6
EC Declaration of conformity
We, SDMO Industries - 270 rue de Kerervern, 29490 GUIPAVAS/CS 40047, 29801 BREST CEDEX 9 – France, hereby declare under
our sole responsibility that the following generating sets:
Equipment
Make:
description:
Generating set
KOHLER-SDMO
1. Comply with the safety requirements set out in the Low Voltage Directive - 2014/35/EU of 26 February 2014 in application of the
harmonized standard EN 60204-1: 2006 (AMD 1 2006, COR 2010)
2. Comply with the provisions of the following Directives:
-
Machinery - 2006/42/EC of 17th May 2006 in application of the harmonized standard EN 8528:-13 2016
-
Electromagnetic compatibility - 2014/30/EU of 26th February 2014 in application of the harmonized standards EN 60034-1:
2010 (COR 2010) / EN 61000-6-1: 2007 / EN 61000-6-2: 2005 (COR 2005) / EN 61000-6-3: 2007 (AMD1 2011,
AMD1/COR 12) / EN 55011: 2009 (AMD 1 2010)
-
Relating to the restriction of the use of certain hazardous substances in electrical and electronic equipment - 2011/65/EU of
8th June 2011 in application of the harmonized standard EN IEC 63000 : 2018
-
Relating to noise emission in the environment by equipment for use outdoors- 2000/14/EC of 8 May 2000, via the compliance
procedure set out in Annex VI, amended by Directive 2005/88/EC:
Notified
Trade name:
body:
CETIM - BP
PERFORM 3000 TB UK C5
67- F60304
PERFORM 4500 TB UK C5
– SENLIS -
PERFORM 6500 TB UK C5
FRANCE
Name and address of the person authorized to create and hold the technical file:
L. ANDRIEUX, 270 rue de Kerervern, 29490 GUIPAVAS / CS 40047, 29801 BREST CEDEX 9 – France.
1144_EN
Trade name:
PERFORM 3000 TB UK C5
PERFORM 4500 TB UK C5
PERFORM 6500 TB UK C5
Type:
3499231003558
3499231003619
3499231003695
22/26
Type:
3499231003558
3499231003619
3499231003695
Measured sound
Guaranteed sound
power level:
power level (LwA):
94,86 dB(A)
96 dB(A)
96,1 dB(A)
96 dB(A)
99 dB(A)
99 dB(A)
GUIPAVAS, 09/2022
L. ANDRIEUX
President, SDMO Industries
Serial numbers:
25-2021-00000000-000
➢ 52-2026-99999999-999
Rated output:
2400 W
3200 W
5200 W
2022-08-17
Publicité
