Hansgrohe AXOR Citterio 39031000 Mode D'emploi / Instructions De Montage page 4


Safety Notes
Gloves should be worn during installation to prevent

crushing and cutting injuries.
The shower system may only be used for bathing,

hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pressu-

res.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• The EcoSmart in the adapter bottom can be
®
removed if there are problems with the flow heater or
when more water flow is required.
• Hansgrohe mixers can be used together with
hydraulically and thermically controlled continuous
flow heaters if the flow pressure is at least 0,15 MPa.
• If the water is flowing along the fixture in the direction
of the shaft, the spray former must be replaced with a
standard air bubbler 13913000.
Technical Data
This mixer series-produced with EcoSmart
limiter)
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:

All manuals and user guides at all-guides.com
English
(flow
®
max. 1 MPa
0,1 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 34 - 35)
Flow diagram
(see page 34 - 35)

with EcoSmart

without EcoSmart
Spare parts (see page 37)
Operation (see page 33)
Cleaning (see page 36) enclosed
brochure
®
®