Publicité
Foreword
GB
Dear Customer,
By purchasing your PROXXON Lathe PD 230/E, you have
chosen a good-quality, high-grade machine. The latest
production and testing methods guarantee a high level of
reliability for this machine.
This instruction manual covers:
•
safety regulations
•
operation and maintenance
•
spare parts list
Please read carefully!
Using this instruction manual will
•
make it easier for you to get used to the machine,
•
help prevent faults occurring due to improper use and
•
increase the service life of your machine.
Keep this instruction manual in an easily accessible place.
Only operate this machine if you are qualified to do so and
follow the guidelines in this instruction manual.
PROXXON does not accept responsibility for the safe
functioning of the machine
•
if it is handled in a manner which constitutes improper
use,
•
if it is used for other purposes which are not specified in
the instruction manual,
•
if the safety regulations are not observed.
Warranty claims are invalid if
•
the machine is incorrectly operated,
•
the machine has not been sufficiently maintained.
In the interests of your safety, please always observe the
safety regulations.
Only use genuine PROXXON spare parts.
We reserve the right to make further alterations for the pur-
pose of technical progress.
We wish you every success with your machine.
PROXXON GmbH
- 16 -
All manuals and user guides at all-guides.com
Safety regulations
Important
The safety regulations for this machine are contained in a
supplementary brochure and enclosed with this machine.
Please note these safety instructions when working with the
machine. In doing so, you will protect yourself and others.
Contents
Foreword
Safety regulations (see enclosed booklet)
Legend
Description of the machine
Technical data
Installation and setting up
Switching on the machine
Operating the handwheels
Switching on the automatic feed
Working with the tailstock
Selecting the turning tool
Inserting the turning tool in the tool holder
Setting the spindle speeds
Calculating the maximum spindle speed
Clamping the work piece in the lathe chuck
Turning the jaws of the lathe chuck
Longitudinal turning
Face turning
Taper turning
Cutting off a work piece
Machining long work pieces with tailstock and centre
Fitting change gears for thread cutting
Thread cutting with the turning tool
Thread cutting using the top slide
Cutting left threads
Accessories for Lathe PD 230/E
Installing the centre lathe
Removing the centre
Four-jaw chuck
Collet chuck unit and collet chucks
Fastening the drill chuck
Fixed steady
Maintenance
General
Setting the guide play
Spare parts list
Page
16
17
17
17
17
18
18
18
18
19
19
19
19
20
20
20
21
21
21
21
21
22
23
23
23
23
23
24
24
24
24
25
25
25
106
Publicité
