Publicité
9. TROUBLE SHOOTING
Depending on the symptoms that you observe, you can probably know the cause of the problem and could even
solve it:
Troubleshooting
The engine does not start
The machine does not blow
If you cannot solve the problem using this table, take your machine to your service dealer.
To locate your nearest after sales dealer to your house, contact the shop where you bought the machine from.
All manuals and user guides at all-guides.com
The machine is not connected to
Damaged cable
The machine is not completely
Damaged switch
The machine lever is in position
Ventilator obstructed.
Tubes obstructed
Cause
the mains
mounted
0FF
33/112
Action
Plug the machines to the mains.
Take the machine to the after sales
agent. Never repair the cable with
tape.
Mount the tubes and the catcher.
Take the machine to the after sales
service
Put the lever on the blowing
position.
Remove the tube and clean the
ventilator.
Clean the tubes
English
Publicité
