Publicité
How do I reassemble
and start up TrueSTEAM?
Follow these steps to reassemble the tank and start up
TrueSTEAM after cleaning:
Attach tank by raising the latch.
Pull the white water valve forward to connect to the
the black spool. Then turn the manual shutoff valve to
the "Lock" position.
M29675
M29676
Plug in the power cord.
The Power light will be on at start-up. If the humidity
control is also actively calling for humidity, the
Humidifying
light will blink. This indicates that
TrueSTEAM is waiting to act on the call to allow time
for the tank to be fully connected.
M29677
Press the Go button to make TrueSTEAM ready
for use. You must actively call for humidity from the
humidity control for TrueSTEAM to produce steam.
Note: You don't have to press the Go button after pJugging in the power cord.
TrueSTEAM will wait for 5 minutes and then automatically
reset itself.
18
TrueSTEAM Humidification
System
69-2286EF--01
Publicité
